Specifications

7-31
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 7 Configuring Voice Mail
Configuring System-Wide Voice-Mail Parameters
DETAILED STEPS
Configuring Default Addressing for Sending a Voice Message
Prior to release 3.0, you could not specify whether voice messages were addressed by name or extension
at the system level for all the features. Starting with release 3.0, the default setting is the same as in
previous versions, which is to address the message by name.
Prerequisites
Cisco Unity Express 3.0 or a later version
SUMMARY STEPS
1. config t
2. voicemail conversation address-by {extension | name}
3. end
4. show voicemail conversation {caller | subscriber}
Command or Action Purpose
Step 1
config t
Example:
se-10-0-0-0# config t
Enters configuration mode.
Step 2
voicemail conversation subscriber msg-properties
day-of-week
Example:
se-10-0-0-0(config)# voicemail conversation
subscriber msg-properties day-of-week
Includes the day-of-week information in the message
properties playback, system wide.
Step 3
end
Example:
se-10-0-0-0(config)# end
Returns to privileged EXEC mode.
Step 4
show voicemail conversation subscriber
Example:
se-10-0-0-0# show voicemail conversation subscriber
(Optional) Displays the current message properties
settings.