Specifications

7-28
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 7 Configuring Voice Mail
Configuring System-Wide Voice-Mail Parameters
4. end
5. show voicemail conversation {caller | subscriber}
DETAILED STEPS
Configuring the Use of a Voice Mail Summary Prompt during Subscriber Login
Starting in release 3.0, a system-wide configuration option enables subscribers to play a summary of the
new messages in the corresponding General Delivery Mailboxes (GDMs) during login. This option is
applicable only to users, not to GDMs. You can configure this option using either the CLI or the GUI.
This option is disabled by default. When the option is disabled, the behavior is the same as in previous
versions. Before 3.0, for a subscriber to see if there were any new messages in their associated GDMs,
they would have to access an individual GDM by pressing 9 when they logged into their mailbox.
When this option is enabled, users hear a prompt that explains how many messages they have and how
many of those messages are urgent. If a GDM has a spoken name, it is included in the message.
Otherwise, the mailbox extension is included in the message. After this point, the functionality is the
same as in previous versions.
Prerequisites
Cisco Unity Express 3.0 or a later version
Command or Action Purpose
Step 1
config t
Example:
se-10-0-0-0# config t
Enters configuration mode.
Step 2
voicemail conversation caller multi-msgs-same-mbx
Example:
se-10-0-0-0(config)# voicemail conversation caller
multi-msgs-same-mbx
Enables the caller to leave multiple messages for the
same mailbox.
Step 3
voicemail conversation caller multi-msgs-any-mbx
Example:
se-10-0-0-0(config)# voicemail conversation caller
multi-msgs-any-mbx
Enables the caller to leave multiple messages for the
different mailboxes.
Step 4
end
Example:
se-10-0-0-0(config)# end
Returns to privileged EXEC mode.
Step 5
show voicemail conversation {caller | subscriber}
Example:
se-10-0-0-0# show voicemail conversation subscriber
(Optional) Displays the values configured for voice
mail conversation.