Specifications

7-23
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 7 Configuring Voice Mail
Configuring System-Wide Voice-Mail Parameters
Configuring System-Wide Voice-Mail Parameters for All Voice Mailboxes
SUMMARY STEPS
1. config t
2. voicemail capacity time minutes
3. voicemail message mandatory-expiry
4. system language preferred xx_YY
5. voicemail default {broadcast expiration time days | expiration time days | language xx_YY |
mailboxsize mailboxsize-seconds |
messagesize messagesize-seconds}
6. voicemail operator telephone tel-number
7. voicemail recording time seconds
8. voicemail callerid
9. voicemail conversation caller recording-prompt
10. voicemail mailbox-selection {last-redirect | original-called}
11. exit
12. copy running-config startup-config
13. show voicemail limits
14. show system language
DETAILED STEPS
Command or Action Purpose
Step 1
config t
Example:
se-10-0-0-0# config t
Enters configuration mode.
Step 2
voicemail capacity time minutes
Example:
se-10-0-0-0(config)# voicemail capacity time 3000
Sets the time value as the system-wide maximum
storage space in minutes allowed for all
configured mailboxes.
Step 3
voicemail message mandatory-expiry
Example:
se-10-0-0-0# voicemail message mandatory-expiry
Enables mandatory message expiry.
Step 4
system language preferred xx_YY
Example:
se-10-0-0-0(config)# system language preferred en_ENU
Specifies the default language used for voice-mail
prompts on the local Cisco Unity Express system.
• xx_YY—Specifies the default language used
for voice-mail prompts on the local
Cisco
Unity Express system. See the Release
Notes for Cisco Unity Express for a list of
available languages.