Specifications

7-15
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 7 Configuring Voice Mail
Planning Mailbox Configuration
Starting in Cisco Unity Express config-mailbox mode, enter the following command:
[no|default] login pinless {subscriber-phones | anyphone}
The no login pinless... command forces a subscriber to enter a PIN in order to access the voice mailbox.
The default login pinless... command has the same effect as the no login pinless... command, because
a PIN is required to access voice mailboxes by default.
The login pinless subscriber-phones command allows a caller to access the voice mailbox from the
subscriber's configured extension, E.164, or fax numbers without requiring a PIN. Callers not originating
from one of these sources will be required to enter a PIN.
The login pinless any-phone command allows any caller to access to the voice mailbox without entering
a PIN.
Note Although this command appears under the GDM configuration, it is valid only for personal mailboxes.
If you try to use the command in the GDM configuration, you get an error message.
Example:
se-10-0-0-0(config-mailbox)# no login pinless subscriber-phones
The following Cisco Unity Express EXEC mode command for displaying mailbox details also displays
the PINless login configuration.
show voicemail detail mailbox [owner]
Example:
Owner: /sw/local/users/cjwhite
Type: Personal
Description:
Busy state: idle
Enabled: true
Allow login without pin: [no |
yes - from subscriber's phone numbers |
yes - from any phone number]
Mailbox Size (seconds): 3000
Message Size (seconds): 60
Play Tutorial: false
Fax Enabled: true
Space Used (seconds): 12
Total Message Count: 1
New Message Count: 1
Saved Message Count: 0
Future Message Count: 0
Deleted Message Count: 0
Fax Message Count: 0
Expiration (days): 30
Greeting: standard
Zero Out Number:
Created/Last Accessed: Jun 05 2007 17:06:07 PDTumber: 1