Specifications

5-72
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 5 Configuring System Components
Configuring Historical Reporting
Examples
Following is example output of the show ccn reporting historical command:
se-10-0-0-0# show ccn reporting historical
Database Information
--------------------
Enabled : Yes
Description: Chicago office database
DB Usage: 50%
Current Maintenance Status: idle
Purge Schedule
--------------
Daily Time: 5:00 AM
Data older than 30 days will be purged
Date of last completed purge: Fri Feb 10 22:00:00 EST
Purge Capacity Configuration
----------------------------
Email Address: [e-mail]
Warning Capacity: 65%
Purge Capacity: 75%
Manually Purging the Historical Reporting Database
Use the purge now command to initiate a manual purge of the historical reporting database and remove
historical data older than the specified days-to-keep number of days.
When the database is purged, historical data older than the specified days-to-keep value (in the range of
1–1000 days) is removed from the database. The days-to-keep value is required to initiate a manual
purge.
Note Because the purging of historical data on the module is resource-intensive, we recommend that the
manual purge be done during off-peak hours.
Prerequisites
Cisco Unity Express 3.0 or a later version
Step 4
end
Example:
se-10-0-0-0(config-hrdm)# end
Saves and returns to privileged EXEC mode.
Step 5
show ccn reporting historical
Example:
se-10-0-0-0# show ccn reporting historical
Displays the historical reporting database parameters.
Command or Action Purpose