Specifications

5-71
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 5 Configuring System Components
Configuring Historical Reporting
Purge Capacity Configuration
----------------------------
Email Address: [e-mail]
Warning Capacity: 65%
Purge Capacity: 75%
Configuring the Purge Notification E-mail Addresses
Use the purge notification command to configure e-mail addresses of up to 255 characters in length, to
which purge notification and warning messages are sent.
There is no default e-mail address. If an e-mail address is not configured, e-mail notifications are not
sent.
If more than one e-mail address must be configured, enter the e-mail addresses separated by commas
without spaces.
Use the no and default forms of this command to remove this configuration.
Prerequisites
Cisco Unity Express 3.0 or a later version
SUMMARY STEPS
1. config t
2. ccn reporting historical
3. purge notification email address email-address
4. end
5. show ccn reporting historical
DETAILED STEPS
Command or Action Purpose
Step 1
config t
Example:
se-10-0-0-0# config t
Enters global configuration mode.
Step 2
ccn reporting historical
Example:
se-10-0-0-0(config)# ccn reporting historical
se-10-0-0-0(config-hrdm)#
Enters historical reporting database configuration
mode.
Step 3
purge notification email address email-address
Example:
se-10-0-0-0(config-hrdm)# purge notification email
address [e-mail]
Configures an e-mail address or e-mail addresses, to
which purge notification and warning messages are
sent.