Specifications

5-70
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 5 Configuring System Components
Configuring Historical Reporting
2. ccn reporting historical
3. purge warning-capacity percentage percent
4. end
5. show ccn reporting historical
DETAILED STEPS
Examples
Following is example output of the show ccn reporting historical command:
se-10-0-0-0# show ccn reporting historical
Database Information
--------------------
Enabled : Yes
Description: Chicago office database
DB Usage: 50%
Current Maintenance Status: idle
Purge Schedule
--------------
Daily Time: 5:00 AM
Data older than 30 days will be purged
Date of last completed purge: Fri Feb 10 22:00:00 EST
Command or Action Purpose
Step 1
config t
Example:
se-10-0-0-0# config t
Enters global configuration mode.
Step 2
ccn reporting historical
Example:
se-10-0-0-0(config)# ccn reporting historical
se-10-0-0-0(config-hrdm)#
Enters historical reporting database configuration
mode.
Step 3
purge warning-capacity percentage percent
Example:
se-10-0-0-0(config-hrdm)# purge warning-capacity
percentage 65
Configures the percentage value of the total database
capacity that, when reached, causes the system to
send an e-mail message warning that the database
capacity is approaching its limit.
Step 4
end
Example:
se-10-0-0-0(config-hrdm)# end
Saves and returns to privileged EXEC mode.
Step 5
show ccn reporting historical
Example:
se-10-0-0-0# show ccn reporting historical
Displays the historical reporting database parameters.