Specifications

5-69
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 5 Configuring System Components
Configuring Historical Reporting
Examples
Following is example output of the show ccn reporting historical command:
se-10-0-0-0# show ccn reporting historical
Database Information
--------------------
Enabled : Yes
Description: Chicago office database
DB Usage: 50%
Current Maintenance Status: idle
Purge Schedule
--------------
Daily Time: 5:00 AM
Data older than 30 days will be purged
Date of last completed purge:
Purge Capacity Configuration
----------------------------
Email Address: [e-mail]
Warning Capacity: 65%
Purge Capacity: 75%
Configuring the Database Threshold Capacity for Warning Notification
Use the purge warning-capacity command to configure a percentage value of the total database
capacity that, when reached, causes the system to send an e-mail message warning that the database
capacity is approaching its limit. To configure the e-mail address to which this warning message gets
sent, see the “Configuring the Purge Notification E-mail Addresses” section on page 71.
The default warning capacity percentage is 85. The maximum warning capacity percentage value
allowed is 90. The no and default forms of this command set the warning capacity to 85%.
Prerequisites
Cisco Unity Express 3.0 or a later version
SUMMARY STEPS
1. config t
Step 4
end
Example:
se-10-0-0-0(config-hrdm)# end
Saves and returns to privileged EXEC mode.
Step 5
show ccn reporting historical
Example:
se-10-0-0-0# show ccn reporting historical
Displays the historical reporting database parameters.
Command or Action Purpose