Specifications

5-65
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 5 Configuring System Components
Configuring Historical Reporting
Examples
Following is example output of the show ccn reporting historical command:
se-10-0-0-0# show ccn reporting historical
Database Information
--------------------
Enabled : Yes
Description: Chicago office database
DB Usage: 50%
Current Maintenance Status: idle
Purge Schedule
--------------
Daily Time: 4:00 AM
Data older than 365 days will be purged
Date of last completed purge:
Purge Capacity Configuration
----------------------------
Email Address: [e-mail]
Warning Capacity: 65%
Purge Capacity: 75%
Oldest Days to purge: 7
Step 4
description word
Example:
se-10-0-0-0(config-hrdm)# description “Chicago
office database”
(Optional) Sets the description for the historical
reporting database. Use quotes around the text.
The default value of the description is the hostname
of the Cisco Unity Express system. The no and
default forms of this command set the description
value to the configured hostname of the system.
Step 5
enabled
Example:
se-10-0-0-0(config-hrdm)# enabled
Enables historical reporting. The collection of
historical data is disabled by default. You must enable
it before the system starts saving these statistics in the
reporting database. However, if an IVR license is
purchased and installed on the module, the collection
of historical data is automatically enabled
Use the no form of this command to disable the
historical reporting database. If the historical
reporting database is disabled, call-related events are
not stored in the database. Use the default form of
this command to enable the database.
Step 6
end
Example:
se-10-0-0-0(config-hrdm)# end
Saves and returns to privileged EXEC mode.
Step 7
show ccn reporting historical
Example:
se-10-0-0-0# show ccn reporting historical
Displays the historical reporting database parameters.
Command or Action Purpose