Datasheet

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)

CONFIGURING the SERVER

Select an embedded RAID option from Tab le 5 on page 19, or one internal or external drive

PCIe RAID controller or one of each from Table 7 on page 20. You may also select an

appropriate optional RAID configuration listed in Table 7 on page 20

(2) 2-CPU Configurations

Select an embedded RAID option from Tab le 5, or one mezzanine RAID controller from Table 6

on page 19 along with an external RAID controller if desired, or one internal or external drive

PCIe RAID controller or one of each if desired from Table 7 on page 20. You may also select an

appropriate optional RAID configuration listed in Table 7 on page 20.

(3) Available RAID Controller Combinations

Caveats

■ Note that only a single Cisco VIC card (the half-height Cisco VIC 1225 PCIe card) is supported

and it must be installed in the full-height PCIe slot (slot 1) on riser 1. So take this into

account when populating RAID controller cards.

■ You can choose an optional RAID configuration (RAID 0, 1, 5, 6, or 10), which is

preconfigured at the factory. The RAID level you choose must be an available RAID choice for

the controller selected. RAID levels 50 and 60 are supported, although they are not available

as configuration options.

NOTE: For more important information regarding RAID combinations and support,

see RAID Summary, page 56 and RAID Option ROM (OPROM) Settings, page 58.

NOTE: For more important information regarding RAID support, see RAID Summary,

page 56 and RAID Option ROM (OPROM) Settings, page 58.