Datasheet

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)

CONFIGURING the SERVER

Select RAID Options

Select as follows (these choices are dependent on the number of CPUs installed):

■ One embedded RAID upgrade option, or

■ One mezzanine RAID controller, or

■ One mezzanine RAID controller and one external RAID controller, or

■ One internal RAID controller, or

■ One internal RAID controller and one external RAID controller

NOTE: For all valid combinations of embedded RAID, mezzanine RAID, and

internal/external RAID controller combinations, see

RAID Summary, page 56.

Table 5 Available Embedded RAID Options

Product ID (PID) PID Description

RAID Controllers

UCSC-RAID-ROM5 Onboard RAID, supporting up to 8 SAS+SATA drives. This option supports RAID 0,

1, and 10, and operates at 3 Gb/s. Operating systems supported are Windows

and Linux only (no VMware support).

UCSC-RAID-ROM55 Onboard RAID, supporting up to 8 SAS+SATA drives. This option supports RAID 0,

1, 5, and 10, and operates at 3 Gb/s. Operating systems supported are

Windows and Linux only (no VMware support).

Table 6 Available Mezzanine Card RAID Options

Product ID (PID) PID Description

Mezzanine RAID Controllers (not supported in 1-CPU systems)

UCSC-RAID-11-C220 Cisco UCSC RAID SAS 2008M-8i Mezzanine Card (RAID 0, 1, 5, 10, and 50

supported), operating at 6 Gbs.

■ Supports up to eight internal SAS+SATA drives. SAS and SATA drives can be

mixed.

■ Factory-configured RAID options available: RAID 0, 1, 5, and 10 (see the

RAID PIDs section in this table)

UCSC-RAID-MZ-220 Cisco UCSC RAID SAS 2008M-8i Mezzanine Card (RAID 0, 1, 10 supported),

operating at 6 Gbs.

■ Supports up to eight internal SAS+SATA drives. SAS and SATA drives can be

mixed.

■ Factory-configured RAID options available: RAID 0, 1, and 10 (see the RAID

PIDs section in this table)

■ No data cache backup