Datasheet

Cisco UCS B200 M4 Blade Server

BASE SERVER STANDARD CAPABILITIES and FEATURES

Table 1 lists the capabilities and features of the base server. Details about how to configure the server for

a particular feature or capability (for example, number of processors, disk drives, or amount of memory)

are provided in

CONFIGURING the SERVER on page 7.

NOTE: NOTE: The B200 M4 blade server requires UCS Manager (UCSM) to operate as

part of the UCS system.

■ The B200 M4 with E5-2600 v3 CPUs requires UCSM 2.2(3a) or later.

Table 1 Capabilities and Features

Capability/Feature Description

Chassis The UCS B200 M4 Blade Server mounts in a Cisco UCS 5100 Series blade

server chassis or UCS Mini blade server chassis.

CPU One or two Intel® E5-2600 v3 Series processor family CPUs

Chipset Intel® C610 chipset

Memory 24 total DIMM slots

■ Support for Advanced ECC

■ Support for registered ECC DIMMs (RDIMMs)

■ Support for load-reduced DIMMs (LR DIMMs)

■ Up to 1536 GB total memory capacity (B200 M4 configured with two

CPUs using 64 GB DIMMs)

I/O Mezzanine adapters:

■ One connector for Cisco’s VIC 1340 or 1240 adapter, which provides

Ethernet and Fibre Channel over Ethernet (FCoE)

■ One connector for various types of Cisco adapters and Cisco UCS Storage

Accelerator adapters.

Storage controller Cisco FlexStorage 12G SAS RAID controller (powered by the LSI SAS 3108 chip

- see http://www.lsi.com/products/raid-on-chip/pages/lsi-sas-3108.aspx)

with drive bays, providing up to 12 Gbps SAS connectivity, offering:

■ SAS/SATA support

■ RAID 0 and 1 and non-RAID

NOTE: The Cisco VIC 1200 Series (1240 and 1280) is compatible

in UCS domains that implement both 6100 and 6200 Series Fabric

Interconnects. However, the Cisco VIC 1300 Series (1340 and 1380)

is compatible only with the 6200 Series Fabric Interconnects.