Datasheet

Cisco UCS B200 M4 Blade Server

CONFIGURING the SERVER

NOTE: For environments with 6100 Series Fabric Interconnects, you must configure

only the VIC 1240/1280 adapters (1200 Series) and not 1340/1380 (1300 Series).

From an I/O connectivity standpoint, configure only the VIC 1200 Series with the

6100 Series Fabric Interconnects.

NOTE: There are two slots on the server. One is a dedicated slot for the VIC

1340/1240 adapter only and one accommodates Cisco adapters or Cisco Storage

Accelerator adapters as well as other options.

Table 8 shows which adapters plug

into each of the two slots. Only the VIC 1340 or 1240 adapter plugs into the VIC

1340/1240 adapter slot. All other adapters plug into the mezzanine adapter slot.

NOTE: You must have a B200 M4 configured with 2 CPUs to support cards that plug

into the mezzanine connector. The VIC 1340 and 1240 adapters are supported on

both 1- and 2-CPU configured systems.