Datasheet

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)
CONFIGURING the SERVER
19
Select RAID Options
Select one of the following (these choices are dependent on the number of CPUs installed):
■ One embedded RAID upgrade option for internal drives, or
■ One mezzanine RAID controller for internal drives, or
■ One RAID controller for external drives, or
■ One RAID controller for internal drives, or
■ One mezzanine RAID controller for internal drives and one RAID controller for external
drives
NOTE: For all valid combinations of embedded RAID, mezzanine RAID, and
internal/external RAID controller combinations, see
RAID Details, page 57.
Table 5 Available Embedded RAID Options
Product ID (PID) PID Description
RAID Controllers
UCSC-RAID-ROM5 Onboard RAID, supporting up to 8 internal SAS+SATA drives. This option
supports RAID 0, 1, and 10, and operates at 3 Gb/s. Operating systems
supported are Windows and Linux only (no VMware support).
UCSC-RAID-ROM55 Onboard RAID, supporting up to 8 internal SAS+SATA drives. This option
supports RAID 0, 1, 5, and 10, and operates at 3 Gb/s. Operating systems
supported are Windows and Linux only (no VMware support).
Table 6 Available Mezzanine Card RAID Options
Product ID (PID) PID Description
Mezzanine RAID Controllers (not supported in 1-CPU systems)
UCSC-RAID-11-C220 Cisco UCSC RAID SAS 2008M-8i Mezzanine Card (RAID 0, 1, 5, 10, and 50
supported), operating at 6 Gbs.
■ Supports up to eight internal SAS+SATA drives. SAS and SATA drives can be
mixed.
■ Factory-configured RAID options available: RAID 0, 1, 5, and 10 (see the
RAID PIDs section in this table)