Datasheet

Cisco UCS B420 M4 Blade Server
22
CONFIGURING the SERVER
Select an adapter combination according to Table 11 or Table 12 on page 23.
NOTE: CPU1 controls adapter slot 1, CPU 2 controls adapter slot 3, and CPU 4
controls adapter slot 2.
Table 11 Supported Adapter Combinations for 4 CPUs Installed
Adapter Configurations
Fabric Extenders Aggregate
Bandwidth
Fabric
Interconnects
Adapter Slot 1 Adapter Slot 2 Adapter Slot 3 2 x 2208XP 2 x 2204XP
VIC 1340 not populated not populated 40 Gb/s 20 Gb/s 2 x 62xx
VIC 1340 Port Expander Card not populated 80 Gb/s 40 Gb/s 2 x 62xx
VIC 1340 not populated VIC 1380 120 Gb/s 60 Gb/s 2 x 62xx
VIC 1340 Port Expander Card VIC 1380 160 Gb/s 80 Gb/s 2 x 62xx
not populated not populated VIC 1380 80 Gb/s 40 Gb/s 2 x 62xx
VIC 1340 Cisco UCS Storage
Accelerator
(Fusion-io)
not populated 80 Gb/s 40 Gb/s 2 x 62xx
Note: for the following configuration, slots 2 and 3 must have identical types of storage cards.
VIC 1340 Cisco UCS Storage
Accelerator
(Fusion-io)
Cisco UCS Storage
Accelerator
(Fusion-io)
80 Gb/s 40 Gb/s 2 x 62xx
VIC 1240 not populated not populated 40 Gb/s 20 Gb/s 2 x 61xx
VIC 1240 not populated VIC 1280 120 Gb/s 60 Gb/s 2 x 61xx
VIC 1240 Port Expander Card VIC 1280 160 Gb/s 80 Gb/s 2 x 61xx