Datasheet

Cisco UCS C240 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)
8
BASE SERVER STANDARD CAPABILITIES and FEATURES
Interfaces Rear panel
One RJ-45 10/100/1000 Ethernet management port, using Cisco
Integrated Management Controller (CIMC) firmware
Four 1-Gb LOM ports
One RJ45 serial port connector
Two USB 2.0 port connectors
One DB15 VGA connector
Various PCIe card ports (dependent on which cards are installed)
Converged Network Adapter (CNA) ports
Network Interface Card (NIC) ports
Host Bus Adapter (HBA) ports
Front panel
One KVM console connector (supplies two USB 2.0, one VGA, and one
serial connector)
Front Panel A front panel controller provides status indications and control buttons
Power subsystem One power supply is required (either 650 W or 1200 W). An additional power
supply may be ordered to provide 1+1 redundancy. The power supplies must
match in a redundant power supply configuration.
Fans Chassis:
Six hot-swappable fans for front-to-rear cooling
Power supply:
Each power supply is equipped with a fan.
Integrated management
processor
Cisco Integrated Management Controller (CIMC) firmware.
Depending on your CIMC settings, the CIMC can be accessed through the 1-Gb
Ethernet dedicated management port, the 1-Gb Ethernet LOM ports, or a
Cisco P81E or Cisco 1225 virtual interface card (VIC).
Capability/Feature Description