Datasheet

Cisco UCS C460 M4 High-Performance Rack-Mount Server

CONFIGURING the SERVER

Choose External Drive Controller

If desired, choose one external drive controller from Table 11

R2XX-RAID10 Factory pre-configured RAID option

Enable RAID 10 Setting. Requires an even number of drives (minimum 4

drives) of same size, speed, capacity.

NOTE: No RAID option can be chosen if you have one of the following configurations:

• A mix of SAS and SATA drives

•No drives

Table 12 Available External Drive Controller RAID Options

Product ID (PID) PID Description

SAS HBA for External JBOD Attach

Note that the following controller, if selected, is installed by default in PCIe slot 5 (riser 1). Two

SFF8644 mini-SAS x4 connectors on this card are accessible at the rear of the chassis.

UCSC-SAS9300-8E Cisco 12G SAS 9300-8e HBA for external JBOD attach

■ Supports external JBOD using x4 and x8 wide SAS ports

Table 11 Available Internal Drive RAID Options (continued)

Product ID (PID) PID Description

NOTE: For Cisco 12G SAS 9300-8e HBA external drive enclosure

support, see the enclosure section of the compatibility list at the

following link:

http://tinyurl.com/pp83xyk

Customers should contact their storage vendor for technical support

related to external JBOD enclosures.