Specifications

Cisco UCS Cisco UCS C220 M4 High-Density Rack Server (Large Form Factor Disk Drive Model)
CONFIGURING the SERVER
37
STEP 10 ORDER TOOL-LESS RAIL KIT AND OPTIONAL REVERSIBLE CABLE
MANAGEMENT ARM
Select a Tool-Less Rail Kit
Select a tool-less rail kit from Table 15.
Select an Optional Reversible Cable Management Arm
The reversible cable management arm mounts on either the right or left slide rails at the rear of
the server and is used for cable management. Use
Table 16 to order a cable management arm.
For more information about the tool-less rail kit and cable management arm, see the Cisco UCS
C220 M4 Installation and Service Guide at this URL:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C220M4/install/C220M4.html
Table 15 Tool-Less Rail Kit Options
Product ID (PID) PID Description
UCSC-RAILF-M4 Friction Rail Kit for C220 M4 Servers
UCSC-RAILB-M4 Ball Bearing Rail Kit for C220 M4 and C240 M4 Servers
Table 16 Cable Management Arm
Product ID (PID) PID Description
UCSC-CMAF-M4 Reversible CMA for C220 M4 tool-less friction and ball bearing rail kit
NOTE: If you plan to rackmount your UCS C220 M4 server, you must order a tool-less
tool-less rail kits.