Datasheet

Cisco UCS B250 M2 Blade Server
BASE SERVER STANDARD CAPABILITIES and FEATURES
5
BASE SERVER STANDARD CAPABILITIES and FEATURES
Table 1 lists the capabilities and features of the base server. Details about how to configure the server for
a particular feature or capability (for example, number of processors, disk drives, or amount of memory)
are provided in
CONFIGURING the SERVER on page 6.
Table 1 Capabilities and Features
Capability/Feature Description
Chassis The B250 M2 Blade Server mounts in a Cisco UCS 5100-series chassis
CPU Up to two Intel® Xeon® 5500 or 5600 series processors
Chipset Intel® 5520 (Tylersburg) chipset
Memory 48 slots for registered DIMMs, up to 384 GB of memory.
Expansion slots Two mezzanine slots are provided
Storage controller Onboard LSI 1064E RAID controller
Factory-configured RAID support options:
■ RAID 0 and 1
Internal storage devices Up to two optional front-accessible, hot-pluggable small form factor (SFF)
SATA solid-state disk drives (SSDs) or SAS hard disk drives (HDDs).
Video The server CIMC chip includes a Matrox G200 core. The first 8 MB of memory
are allocated to the video core.
Interfaces ■ Front panel
• One console connector (see ORDER OPTIONAL KVM CABLE on page
26)
Power subsystem Integrated in the Cisco UCS 5100 series chassis
Fans Integrated in the Cisco UCS 5100 series chassis
Integrated management
processor
The built-in Cisco Integrated Management Controller (CIMC) GUI or CLI
interface enables you to monitor the server inventory, health, and system
event logs.