Datasheet

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
21
Select an embedded RAID option from Table 5 on page 17, or one internal or external drive
PCIe RAID controller or one of each from Table 7 on page 18. You may also select an
appropriate optional RAID configuration listed in Table 7 on page 18
(2) 2-CPU Configurations
Select an embedded RAID option from Table 5, or one mezzanine RAID controller from Table 6
on page 17, or one internal or external drive PCIe RAID controller or one of each from Table 7
on page 18. You may also select an appropriate optional RAID configuration listed in Table 7 on
page 18.
(3) Available RAID Controller Combinations
Caveats
■ Note that only a single Cisco VIC card (the half-height Cisco VIC 1225 PCIe card) is supported
and it must be installed in the full-height PCIe slot (slot 1) on riser 1. So take this into
account when populating RAID controller cards.
■ You can choose an optional RAID configuration (RAID 0, 1, 5, 6, or 10), which is
preconfigured at the factory. The RAID level you choose must be an available RAID choice for
the controller selected. RAID levels 50 and 60 are supported, although they are not available
as configuration options.
NOTE: For more important information regarding RAID combinations and support,
see RAID Summary, page 55 and RAID Option ROM (OPROM) Settings, page 57.
NOTE: For more important information regarding RAID support, see RAID Summary,
page 55 and RAID Option ROM (OPROM) Settings, page 57.