Datasheet

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
17
Select RAID Options
Select as follows (these choices are dependent on the number of CPUs installed):
■ One embedded RAID upgrade option, or
■ One mezzanine RAID controller, or
■ One mezzanine RAID controller and one external RAID controller, or
■ One internal RAID controller, or
■ One internal RAID controller and one external RAID controller
NOTE: For all valid combinations of embedded RAID, mezzanine RAID, and
internal/external RAID controller combinations, see
RAID Summary, page 55.
Table 5 Available Embedded RAID Options
Product ID (PID) PID Description
RAID Controllers
UCSC-SWRST Onboard Intel RSTe RAID, supporting up to 4 SAS+SATA drives. SAS and SATA
drives can be mixed. This option supports RAID 0, 1, and 10, and operates at 3
Gb/s. Operating system supported is Linux only (no VMware support).
UCSC-RAID-ROM1 Onboard LSI RAID, supporting up to 4 SAS+SATA drives. SAS and SATA drives can
be mixed. This option supports RAID 0, 1, and 10, and operates at 3 Gb/s.
Operating systems supported are Windows and Linux only (no VMware
support).
UCSC-RAID-ROM15 Onboard LSI RAID, supporting up to 4 SAS+SATA drives. SAS and SATA drives can
be mixed. This option supports RAID 0, 1, 5, and 10, and operates at 3 Gb/s.
Operating systems supported are Windows and Linux only (no VMware
support).
Table 6 Available Mezzanine Card RAID Options
Product ID (PID) PID Description
Mezzanine RAID Controllers (not supported in 1-CPU systems)
UCSC-RAID-11-C220 Cisco UCSC RAID SAS 2008M-8i Mezzanine Card (RAID 0, 1, 5, 10, and 50
supported), operating at 6 Gbs.
■ Supports up to eight internal SAS+SATA drives (limited to four drives for
the C220 M3 LFF chassis). SAS and SATA drives can be mixed.
■ Factory-configured RAID options available: RAID 0, 1, 5, and 10 (see the
RAID PIDs section in this table)
■ No data cache backup