Installation guide

Hardware Installation Guide for Cisco UCS E-Series Servers
Hardware Requirements
9
Cisco UCS E-Series Server Modules Hardware Installation Guide
M2
3
Off No Memory installed in this socket
Green Memory M2 is installed
Amber Memory M2 is installed, but fault was detected
HOT Green Temperature is in range
Amber A high temperature has been detected on the CPU, power
supply, or other internal sensors
D0A Green Status of hard drive activity is as follows:
• Steady—Hard Drive is present
• Blinking—Activity
• Off—Inactive or there is no power supplied to the CPU
D0F Amber Fault detected on the hard drive
D1A Green Status of hard drive activity is as follows:
• Steady—Hard Drive is present
• Blinking—Activity
• Off—Inactive or there is no power supplied to the CPU
D1F Amber Fault is detected on the hard drive
D2A Green If the optional hard drive is present, then the status of
hard drive activity is as follows:
• Steady—Hard Drive is present
• Blinking—Activity
• Off—Inactive or there is no power supplied to the
CPU
If there is a PCIe card installed, the LED displays a
steady Green
D2F Amber Fault is detected on the hard drive
ACT Green Blinks when the processor is active
STS Green Operation is normal
Amber Fault is detected on the processor
IMC Green Blinks when Cisco Integrated Management Controller is
operating normally
Table 4 LED States for the Double-Wide E-Series Servers (continued)
LED Color Indicates