Installation guide

Hardware Installation Guide for Cisco UCS E-Series Servers
Hardware Requirements
8
Cisco UCS E-Series Server Modules Hardware Installation Guide
OL-26447-01
Figure 5 Double-Wide E-Series Server
E-Series Servers LED States
There are LEDs on the E-Series Servers. Table 4 and Table 6 list the LED states.
1 DIMM slots 2 (Optional) PCIe assembly
Available for HDD2, FCoE port, or 4-Gigabit Ethernet
ports.
3 Hard Disk Drives (HDD0 and HDD1)
Table 4 LED States for the Double-Wide E-Series Servers
LED Color Indicates
M0
1
Off No Memory installed in this socket
Green Memory M0 is installed
Amber Memory M0 is installed, but fault was detected
M1
2
Off No Memory installed in this socket
Green Memory M1 is installed
Amber Memory M1 is installed, but fault was detected