Installation guide

Hardware Installation Guide for Cisco UCS E-Series Servers

Installing E-Series Servers in Cisco ISR G2 Routers

Cisco UCS E-Series Server Modules Hardware Installation Guide

OL-26447-01

Figure 13 Replacing a Hard Disk Drive on the Double-Wide E-Series Server

Step 4

(Optional) If the slot is empty, use the screwdriver to loosen the screws on the bracket to remove the

bracket that is attached to the slot. See Figure 14. Go to Step 7.

1 Hard Disk Drives 2 Hard Disk Drive Assembly

3 Cover Faceplate 4 Captive Screws on Hard Disk Drive Assembly