User Manual

Table Of Contents

Cleaning Up Patch Files

Step 1 From the Cisco UCS Director Shell menu, choose the Clean-up Patch Files option and press the Enter key.

The following information is displayed:

Do you want to delete an old patch file/directory [y/n]?

Step 2 Enter y and press Enter to delete the patch files.

The following information is displayed:

1) cucsd_patch_6_6_0_0_66450

2) cucsd_patch_6_6_0_0_66460

3) cucsd_patch_6_6_0_0_66470

4) cucsd_patch_6_6_0_0_66480

5) infra-12-07-2017-21-17-30

6) infra-12-07-2017-21-17-40

7) Exit

Select an option to delete a patch file/directory:

Step 3 Choose the required option to delete the patch file or directory and press Enter.

The following information is displayed:

Select an option to delete a patch file/directory: 4

Are you sure you want to delete: cucsd_patch_6_6_0_0_66480 [y/n]?

Step 4 If you are prompted to confirm that you want to delete the patch file or directory, enter y and then press Enter.

The following information is displayed:

Directory Deleted

Press return to continue...

Step 5 Press the Enter key to return to the main menu.

Collecting Logs from a Node

The Collect Logs from a Node option lets you collect logs from the local node or from a remote node.

Step 1 From the Cisco UCS Director Shell menu, choose Collect Logs from a Node Status and press Enter.

The following list of services appears:

**********************************************************************

This wizard helps to do Logs from UCSD Appliance

**********************************************************************

Logs Collection Option #

Exit --> Select '0'

Troubleshooting

Cleaning Up Patch Files