User Manual
Table Of Contents
- Troubleshooting
- Backing up the Monitoring Database in a Multi-Node Setup
- Pinging the Hostname and IP Address
- Viewing Tail Inframgr Logs
- Cleaning Up Patch Files
- Collecting Logs from a Node
- Collecting Diagnostics
- Using Diagnostics Information
- Troubleshooting VMware Console Display Issues
- Enabling HTTP Access
- Resetting MariaDB User Password in a Multi-Node Setup
- Resetting MariaDB User Password in a Standalone Setup
- Generating Device ID
Checking if MariaDB database is running... .UP
The database is started.
Starting the infra services...
Step 8 If you entered n, enter the new password for MariaDB root user and press Enter.
Special characters such as *, \, ', and $ are not allowed for root user passwords.
Note
The following information is displayed:
Specify the new password for MariaDB 'root' user:
Confirm the new password for MariaDB 'root' user:
Password update takes few minutes. Please wait..................... done
MariaDB user password is updated.
Checking if the database is running... yes.
Stopping the database...
..
The database is stopped.
Starting the database...
Checking if MariaDB database is running... UP
The database is started.
Starting the infra services...
After resetting the MariaDB user password, you should restart the BMA services either from the Cisco UCS
Director user interface or from the BMA appliance.
Note
Generating Device ID
You can generate a device ID for a cloned Cisco UCS Director appliance by choosing Configure Network
Interface option.
Step 1 From the Cisco UCS Director Shell menu, choose Configure Network Interface and press Enter.
The following information is displayed:
Cisco UCS Director's VM UUID change detected. It is recommended to generate a new GUID for this UCS
Director instance. Proceed [y/n]?
This option is displayed only when a Cisco UCS Director is cloned. You must generate a new GUID. The
GUID is used to claim a device in Cisco Intersight. For more information about how to claim a device, see the
Cisco UCS Director Administration Guide.
Note
Step 2 Enter y to assign a new, unique, and unclaimed device ID to the cloned Cisco UCS Director, and press Enter. The
following information is displayed.
Generation of Cisco UCS Director GUID is successful.
After configuring the network interface, you must restart the Cisco UCS Director services for the
Troubleshooting
11
Troubleshooting
Generating Device ID