Datasheet

Cisco UCS B420 M3 Blade Server
54
SUPPLEMENTAL MATERIAL
Connectivity using the Cisco UCS 2204XP Fabric Extender
The connectivity options shown in Figure 23 through Figure 30 are shown in Table 31.
Table 31 Supported Adapter
1
Combinations Using the 2204XP
2
Notes
1. In the server BIOS and on the motherboard, “Adapter 1,” “Adapter 2,” and “Adapter 3” are labeled as “mLOM,”
“Mezz 1,” and “Mezz 2,” respectively
2. Not all combinations are supported in 2-CPU configurations (see Table 10 on page 19)
Adapter Slot 1 Adapter Slot 2 Adapter Slot 3
Total Available
Bandwidth
2 x 2204 XP
VIC 1240 Not populated Not populated 20 Gb
Figure 23 on page 55
VIC 1240 Not populated VIC 1280 60 Gb
Figure 24 on page 55
Not populated Not populated VIC 1280 40 Gb
Figure 25 on page 56
VIC 1240 Not populated Emulex or QLogic CNA 40 Gb
Figure 26 on page 56
VIC 1240 Port Expander Card Not populated 40 Gb
Figure 27 on page 57
Not populated Not populated Emulex or QLogic CNA 20 Gb
Figure 28 on page 57
Not populated Emulex or QLogic CNA Emulex or QLogic CNA 40 Gb
Figure 29 on page 58
VIC 1240 Port Expander Card VIC 1280 80 Gb
Figure 30 on page 59
VIC 1240 Not populated Cisco UCS Storage Accelerator 40 Gb
Figure 31 on page 60
VIC 1240
Cisco UCS Storage Accelerator
3
3. This combination requires that both Storage Accelerators be identical.
Cisco UCS Storage Accelerator
3
40 Gb
Figure 32 on page 60
Not populated Cisco UCS Storage Accelerator VIC 1280 80 Gb
Figure 33 on page 61
VIC 1240 Cisco UCS Storage Accelerator VIC 1280 60 Gb
Figure 34 on page 62