Datasheet

Cisco UCS B200 M3 Blade Server
CONFIGURING the SERVER
21
(2) B200 M3 configured with 2 CPUs
For a B200 M3 configured with 2 CPUs, the supported configurations are listed in Table 10.
Choose one configuration.
Also see Network Connectivity on page 43 for more information.
To help ensure that your operating system is compatible with the adapter you have selected,
please check the Hardware Compatibility List at this URL:
http://www.cisco.com/en/US/products/ps10477/prod_technical_reference_list.html
Caveats
■ If a VIC 1240 adapter is not installed, you must choose an Emulex or QLogic I/O adapter to
be installed in the mezzanine slot (see also
Network Connectivity on page 43)
Table 10 Supported VIC 1240 and Mezzanine Adapter Configurations
Fabric
Extender
Compatibility
Adapter in
VIC 1240 Slot
Adapter in Mezzanine Slot Ports Reference
2208XP (PIDs UCS-IOM-2208XP, UCS-IOM2208-16FET)
2208XP VIC 1240 None 4 x 10 Gb Figure 15 on page 50
2208XP VIC 1240 VIC 1280 8 x 10 Gb Figure 16 on page 51
2208XP VIC 1240 Emulex or QLogic I/O adapter, or
Cisco UCS Storage Accelerator
6 x 10 Gb
4 x 10 Gb
Figure 17 on page 51
2208XP VIC 1240 Port Expander Card for VIC 1240 8 x 10 Gb Figure 18 on page 52
2208XP None
Emulex or QLogic I/O adapter
1
Notes...
1. Specifically, the UCSB-MEZ-QLG-03 (QLogic) or UCSB-MEZ-ELX-03 (Emulex) adapter
2 x 10 Gb Figure 19 on page 52
2204XP (PIDs UCS-IOM-2204XP, UCS-IOM2204-8FET)
2204XP VIC 1240 None 2 x 10 Gb Figure 20 on page 53
2204XP VIC 1240 VIC 1280 4 x 10 Gb Figure 21 on page 54
2204XP VIC 1240 Emulex or QLogic I/O adapter, or
Cisco UCS Storage Accelerator
4 x 10 Gb
4 x 10 Gb
Figure 22 on page 54
2204XP VIC 1240 Port Expander Card for VIC 1240 4 x 10 Gb Figure 23 on page 55
2204XP None
Emulex or QLogic I/O adapter
1
2 x 10 Gb Figure 24 on page 55
2104XP (PID N20-I6584)
2104XP VIC 1240 None 2 x 10 Gb Figure 25 on page 56
2104XP VIC 1240 Cisco UCS Storage Accelerator 2 x 10 Gb Figure 26 on page 56