Datasheet

Cisco UCS B22 M3 Blade Server

CONFIGURING the SERVER

STEP 4 CHOOSE HARD DISK DRIVES or SOLID STATE DRIVES (OPTIONAL)

The UCS B22 M3 can be ordered with or without drives. The standard disk drive features are:

■ 2.5-inch small form factor

■ Hot-pluggable sled mounted

Choose Drives

The supported drives in the UCS B22 M3 are listed in Table 6.

NOTE: The UCS B22 M3 blade server meets the external storage target and switch

certifications as described in the following link:

http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/interoperabilit

y/matrix/Matrix8.html#wp323852

Table 6 Supported Hot-Pluggable Sled-Mounted HDDs and SSDs

Product ID (PID) PID Description

Drive

Type

Capacity

HDDs

A03-D1TBSATA 1 TB 6 Gb SATA 7.2K RPM SFF HDD SATA 1 TB

UCS-HDD900GI2F106 900 GB 6Gb SAS 10K RPM SFF HDD SAS 900 GB

A03-D600GA2 600 GB 6 Gb SAS 10K RPM SFF HDD SAS 600 GB

A03-D500GC3 500 GB 6 Gb SATA 7.2K RPM SFF HDD SATA 500 GB

UCS-HDD300GI2F105 300 GB 6 Gb SAS 15K RPM SFF HDD SAS 300 GB

A03-D300GA2 300 GB 6 Gb SAS 10K RPM SFF HDD SAS 300 GB

SSDs

UCS-SD400G0KA2-G 400GB SATA 2.5" Enterprise Value SSD SATA 400 GB

UCS-SD120GOKS2-EV 120 GB SATA 2.5 inch Enterprise Value 6G SSD SATA 120 GB

UCS-SD100G0KA2-G 100GB SATA 2.5" Enterprise Value SSD SATA 100 GB

NOTE: The integrated LSI 2002 MegaRAID controller supports hard disk drives (HDDs)

or solid state drives (SSDs). Write cache is not implemented. SSDs are recommended

for applications requiring high-speed local storage, which is an order of magnitude

faster than HDDs.