Datasheet

Cisco UCS B420 M3 Blade Server
16
CONFIGURING the SERVER
“Adapter 1,” “Adapter 2,” and “Adapter 3” refer to the UCSM naming convention for the
adapter slots (this document uses the UCSM naming convention). In the server BIOS and on the
motherboard, the corresponding slots are labeled as “mLOM,” “Mezz 1,” and “Mezz 2,”
respectively. See
Table 7.
Supported Configurations
(1) 4-CPU System Configuration
■ Select an adapter combination in accordance with Table 8.
UCSB-F-LSI-400S LSI 400 GB SLC WarpDrive
Table 7 Adapter Slot Naming
Server BIOS and Motherboard Slot Naming UCSM Slot Naming
mLOM (VIC 1240 only) Adapter 1
Mezz1 Adapter 2
Mezz2 Adapter 3
Table 8 Supported Adapter
1
Combinations (4-CPU Configuration)
Adapter Slot 1 Adapter Slot 2 Adapter Slot 3 Total Available Bandwidth
2 x 2208 XP 2 x 2204 XP 2 x 2104 XP
VIC 1240 Not populated Not populated 40 Gb
Figure 11 on
page 44
20 Gb
Figure 23 on
page 53
20 Gb
Figure 35 on
page 62
VIC 1240 Not populated VIC 1280 120 Gb
Figure 12 on
page 44
60 Gb
Figure 24 on
page 53
40 Gb
Figure 36 on
page 62
Not populated Not populated VIC 1280 80 Gb
Figure 13 on
page 45
40 Gb
Figure 25 on
page 54
20 Gb
Figure 37 on
page 63
VIC 1240 Not populated Emulex or QLogic
adapter
60 Gb
Figure 14 on
page 45
40 Gb
Figure 26 on
page 54
40 Gb
Figure 38 on
page 63
VIC 1240 Port Expander Card
for VIC 1240
Not populated 80 Gb
Figure 15 on
page 46
40 Gb
Figure 27 on
page 55
Network I/O
not supported
2
Not populated Not populated Emulex or QLogic
adapter
20 Gb
Figure 16 on
page 47
20 Gb
Figure 28 on
page 55
20 Gb
Figure 39 on
page 64
Not populated Emulex or QLogic
adapter
Emulex or QLogic
adapter
40 Gb
Figure 17 on
page 47
40 Gb
Figure 29 on
page 56
Network I/O
not supported
2
Table 6 Supported Adapters (continued)
Product ID (PID) PID Description