Datasheet

Cisco UCS B22 M3 Blade Server

BASE SERVER STANDARD CAPABILITIES and FEATURES

Table 1 lists the capabilities and features of the base server. Details about how to configure the server for

a particular feature or capability (for example, number of processors, disk drives, or amount of memory)

are provided in

CONFIGURING the SERVER on page 6.

Table 1 Capabilities and Features

Capability/Feature Description

Chassis The UCS B22 M3 Blade Server mounts in a Cisco UCS 5100 series blade server

chassis

CPU One or two Intel® E5-2400 series processor family CPUs

Chipset Intel® C600 series chipset

Memory 12 total slots for registered ECC DIMMs for up to 192 GB total memory

capacity (using 16 GB DIMMs)

I/O Mezzanine cards:

■ First connector for Cisco’s modular LAN on motherboard (mLOM), which

provides Ethernet and Fibre Channel over Ethernet (FCoE)

■ Second connector for various types of Cisco or third-party network

adapter cards

Storage controller LSI Logic SAS 2002 integrated controller

■ 6 Gbs SAS/SATA support

■ RAID 0 and 1

Internal storage devices Up to two optional, front-accessible, hot-swappable 2.5-inch small form

factor (SFF) SAS or SATA solid-state disks (SSDs) or hard disk drives (HDDs).

An internal USB 2.0 port is also supported. A 4 GB USB 2.0 device is available

from Cisco.

NOTE: The second connector is supported only for 2-CPU system

configurations.

NOTE: The integrated RAID controller does not implement a write

cache. However, servers that implement two HDDs and RAID

controllers with cache lack the ability to match the performance

of RAID’ed SSDs without cache.