Specifications

Send document comments to ucs-docfeedback@cisco.com
3-34
Cisco UCS C460 Server Installation and Service Guide
OL-22326-01
Chapter 3 Maintaining the Server
Installing or Replacing Server Components
Replacing a PCIe Card
Note If you are installing a Cisco UCS P81E Virtual Interface Card (N2XX-ACPCI01), there are prerequisite
considerations. See
Special Considerations for the Cisco UCS P81E Virtual Interface Card
(N2XX-ACPCI01), page 3-37.
This server has 10 PCIe expansion slots. See Figure 3-26 and Table 3-5 for information about the slots
and which slots are hot-swappable.
The replacement procedures differ depending on whether the PCIe slot is hot-swappable or not. This
section contains two procedures:
Replacing a PCIe Card in a Non Hot-Swappable Slot, page 3-35
Replacing a PCIe Card in a Hot-Swappable Slot, page 3-36
Figure 3-26 PCIe Slots
Ta b l e 3-5 PCIe Expansion Slots
Slot Number Description
1
PCI-Express Gen-2x8, ¾ length, x24 connector, hot-swappable
2 PCI-Express Gen-2x8, ¾ length, x24 connector, hot-swappable
3 PCI-Express Gen-2x4, ½ length, x8 connector
4 PCI-Express Gen-2x4, ½ length, x8 connector
5 PCI-Express Gen-2x16, ¾ length, x16 connector
6 PCI-Express Gen-2x8, ¾ length, x8 connector, hot-swappable
7 PCI-Express Gen-2x8, ¾ length, x8 connector, hot-swappable
8 PCI-Express Gen-1x4, ¾ length, x8 connector
9 PCI-Express Gen-1x4, ½ length, x8 connector
10 PCI-Express Gen-2x4, ½ length, x8 connector
198935
1
6
7
2
3
4
8
9
5
10