Specifications

Send document comments to [e-mail]
3-31
Cisco UCS C460 Server Installation and Service Guide
OL-22326-01z
Chapter 3 Maintaining the Server
Installing or Replacing Server Components
Step 2 Install a new drive:
a. Place a new hard drive in the empty drive tray and replace the four drive tray screws.
b. Insert the drive tray into the empty drive bay.
c. Push the tray into the slot until the drive connectors are fully seated in the backplane.
d. Press the ejector lever flat to lock the drive and tray in place.
Figure 3-24 Removing and Replacing Hard Drives
1 Ejector lever 2 Release button
3 Drive tray securing screws
197444
198937
1 2
3
3
3
3
HDD 3
HDD 8
HDD 4
HDD 9
HDD 5
HDD 10
HDD 6
HDD 11
HDD 7
HDD 1 HDD 2
HDD 12