Specifications

Send document comments to [e-mail]
3-8
Cisco UCS C460 Server Installation and Service Guide
OL-22326-01
Chapter 3 Maintaining the Server
Preparing for Server Component Installation
Replaceable Component Locations
This section shows the locations of the components that are discussed in this chapter. The view in
Figure 3-5 is from the top down, with the top cover and internal CPU cage removed.
Figure 3-5 Replaceable Component Locations
1 Power supplies, up to 4 (accessed through the
rear panel).
2 I/O riser module.
3 eUSB connectors (2 on motherboard). 4 SAS riser (a dedicated slot for the optional
RAID controller card)
5 CMOS battery 6 CPUs and heat sinks (up to 4, shown without
CPU cage)
7 Memory risers, which provide slots for up to
8 DIMMs on each riser.
8 RAID battery backup unit (optional when
using the LSI 9260 controller)
9 Fan modules (up to 8) 10 Hard drives (up to 12, accessed through the
front panel)
11 DVD drive (accessed through the front panel) 12 PCIe connector 10 (10 of 10).
See also Figure 3-26 on page 3-34 for all
slots.
2
4 5 8
11
1 976
10
198709
3
12