Specifications

Send document comments to [e-mail]
3-3
Cisco UCS C460 Server Installation and Service Guide
OL-22326-01z
Chapter 3 Maintaining the Server
Status LEDs and Buttons
Operations Panel LEDs and Buttons
Figure 3-2 shows the operations panel LEDs and buttons.
Figure 3-2 Operations Panel LEDs and Buttons
Power supply fault • Green—All power supplies are operating properly.
• Off—One or more power supplies are not operating properly.
Memory fault • Green—All DIMMs are operating properly.
• Off—One or more DIMMs are not operating properly.
CPU fault • Green—All CPUs are operating properly.
• Off—One or more CPUs are not operating properly.
Network activity • Off—The Ethernet link is idle.
• Green and blinking —The Ethernet link is active.
• Green and steady—The Ethernet link is detected but not active.
The blink rate gets faster as network activity increases.
Operations panel LEDs See Operations Panel LEDs and Buttons, page 3-3.
Table 3-1 Front Panel LEDs (continued)
LED Name State
1 ID LED 2 ID button
3 Hard drive fault LED 4 System health LED
5 Fan fault LED 6 Power status LED
7 Power button 8 Reset button
9 NMI button
12 7
8
9
35
197617
4 6