Specifications

Send document comments to ucs-docfeedback@cisco.com

2-23

Cisco UCS C460 Server Installation and Service Guide

OL-22326-01

Chapter 2 Installing the Server

Updating the CIMC Firmware

The server uses CIMC firmware obtained from and certified by Cisco. After you have downloaded a

CIMC firmware image from Cisco, you can use it to update the firmware on your server. Cisco also

provides release notes with each firmware image.

To find the downloads for your server, see the following URL, then click Unified Computing, log in,

and then click Cisco UCS C-Series Rack-Mount Servers.

http://www.cisco.com/cisco/web/download/index.html

For instructions on updating the CIMC firmware, refer to the Cisco UCS C-Series Rack-Mount Server

Configuration Guide or the Cisco UCS C-Series Rack-Mount Server CLI Configuration Guide. See the

documentation road map at the following URL:

http://www.cisco.com/go/unifiedcomputing/c-series-doc

RAID Configurations on Hard Drives

For information about the RAID options in this server and how to access third-party RAID utilities, see

RAID Controller Considerations, page C-1.

Note If your server uses an LSI MegaRAID card for mass storage control, you might hear beeps coming from

the card when you make changes to the array. See the

“Replacing the Motherboard CMOS Battery”

section on page 3-18 for more information.