Specifications

Send document comments to [e-mail]
1-3
Cisco UCS C460 Server Installation and Service Guide
OL-22326-01
Chapter 1 Overview
Table 1-1 lists the features of the C460 server.
.
Ta b l e 1-1 Cisco UCS C460 Server Features
Chassis Four rack-unit (4RU) chassis
Processors Either 2 or 4 Xeon 7500 Series processors.
Two-CPU configurations require 2 power supplies and 4-CPU configurations
require 4 power supplies.
Memory Up to 64 DIMMs
1
, populated in 8 slots on each of the 8 memory risers.
Up to 512 GB of industry-standard DDR3
2
memory.
Storage Up to twelve, 2.5” SAS
3
or SATA
4
hard drives or solid state drives.
Up to 6 TB of hot-pluggable storage.
Disk
Management
Factory-configured RAID
5
support options:
• RAID 0, 1, 5, 6, 10, 50, and 60 support for up to 12 SAS or SATA drives, with
the optional LSI MegaRAID SAS 9260-8i RAID controller
There is a dedicated SAS riser slot for the RAID controller card in the chassis. There
is also a mounting point inside the chassis for the optional RAID battery backup unit
that is available when using the LSI MegaRAID SAS 9260-8i controller.
PCIe I/O Ten PCIe
6
expansion slots, four hot-pluggable.
• Slots 1 and 2—Gen 2x8, 3/4 length card, x24 hot-swappable connectors
• Slots 3 and 4—Gen 2x4, 1/2 length card, x8 connectors
• Slot 5—Gen 2x16, 3/4 length card, x16 connector
• Slots 6 and 7—Gen 2x8, 3/4 length card, x8 hot-swappable connectors
• Slot 8—Gen 1x4, 3/4 length card, x8 connector
• Slot 9—Gen 1x4, 1/2 length card, x8 connector
• Slot 10—Gen 2x4, 1/2 length card, x8 connector
Where “Gen nxn” is the electrical lane width and “xn connector” is the mechanical
length of the connector. The card length is the supported length because of internal
clearance. All PCIe slots are standard-height and require a standard-height
mounting bracket on the PCIe card.
CPU3 must be installed to support PCIe slots 5, 6, 7, 9, and 10.
Legacy I/O devices like video cards are only supported on slots 1,2,3, 4 and 8.