Specifications

Send document comments to [e-mail]
3-9
Cisco UCS C200 Server Installation and Service Guide
OL-20732-02
Chapter 3 Maintaining the Server
Preparing for Component Installation
Replaceable Component Locations
This section shows the locations of the components that are discussed in this chapter. The view in
Figure 3-4 is from the top down, with the top cover, internal cable cover, and internal air baffles
removed.
Figure 3-4 Replaceable Component Locations (Top View)
1 Hard drives (up to four, accessible through
front bays)
2 Fan tray
3 DIMM slots (up to 12) 4 CPUs and heatsinks (up to two)
5 Motherboard CMOS battery 6 PCIe card connector on riser card (with
standard-profile slot)
7 Riser card assembly 8 PCIe card connector on riser card (with
low-profile slot)
9 Socket for trusted platform module (TPM) 10 Socket for LSI 1064-based mezzanine card
11 Power supplies (up to two, accessible through
rear bays)
6
7
8
11
9
10
1
2
5
3
4
195724