Specifications

Send document comments to [e-mail]
Contents
v
Cisco UCS C200 Server Installation and Service Guide
OL-20732-02
APPENDIX B Cable and Power Cord Specifications B-1
KVM Cable B-1
Supported Power Cords and Plugs B-2
AC Power Cord Illustrations B-3
APPENDIX C RAID Controller Considerations C-1
How to Determine Which Controller Is in Your Server C-1
How to Disable Quiet Boot For CIMC Firmware Earlier Than Release 1.2(1) C-2
How To Enable the ICH10R Onboard Controller C-3
How To Launch Option ROM-Based Controller Utilities C-4
For More Information C-4
APPENDIX D Installation for Cisco UCS Integration D-1
Installing a Release 1.2(2) or Later Server for Cisco UCS Integration D-1
Required Items D-2
Procedure D-2
Upgrading a Server Earlier Than Release 1.2(2) for Cisco UCS Integration D-5
Required Items D-5
Upgrade and Connection Procedures D-6
1. Upgrading the Firmware and Rebooting in UCSM Mode D-6
2. Physically Connecting the Server to the Cisco UCS Environment D-8
Supported Network Adapter Card Combinations for UCSM Mode D-10