Specifications

Send document comments to [e-mail]
1-2
Cisco UCS C200 Server Installation and Service Guide
OL-20732-02
Chapter 1 Overview
Figure 1-2 shows the external features of the rear panel. A Generation M2 server is shown (the USB ports
and the 10/100 Ethernet management port are in slightly different positions for Generation M1).
Figure 1-2 Rear Panel Features
The Cisco UCS C200 server has the following components and features:
.
1 Power supply (up to two) 2 10/100 Ethernet management port (RJ-45)
3 USB 2.0 connectors (two) 4 Serial connector (DB9)
5 Video connector (DB15 VGA) 6 10/100/1000 Gigabit Ethernet ports (two)
7 Low-profile PCIe card slot 8 Standard-profile PCIe card slot
M
1/M
2
1
253037
5
6
2
3
4
7
8
Ta b l e 1-1 Hardware Features of the Server
Feature or
Component
Cisco UCS C200 Server
Enclosure Single rack unit (1RU) chassis.
Processors Up to two quad-core Intel Xeon processors.
Memory 12 DIMM
1
slots supporting up to 96 GB of industry-standard DDR3
2
main memory.
Storage Up to four internal SAS
3
or SATA
4
hard drives, supporting up to 4 TB total.
Disk
Management
Factory-configured RAID
5
support options:
• RAID 0 and 1 support for up to four SATA drives with the integrated SATA
controller.
Note The integrated ICH10R RAID controller is not compatible for use with
VMWare ESX/ESXi Server software.
• RAID 0, 1, and 1E support for up to four SAS or SATA drives with the optional
LSI 1064-based controller mezzanine card.
• RAID 0, 1, 5, 6, 00, 10, 50 and 60 support for up to four SAS or SATA drives
with the optional LSI MegaRAID SAS 9260 controller card.
See RAID Controller Considerations, page C-1 for more information about RAID in
this server.
PCIe I/O Up to two PCIe
6
expansion cards, plugged into horizontal riser card sockets:
• One standard-profile, half-length, x16-lane, x16 connector (on riser card).
• One low-profile, half-length, x8-lane, x8 connector (on riser card).