Specifications

Send document comments to [e-mail]
Index
IN-3
Cisco UCS C200 Server Installation and Service Guide
OL-20732-02
O
organization of book i-vii
P
password
resetting CIMC to default
2-21
PCIe cards (mass storage controller), replacing 3-28
PCIe cards (network adapter), replacing 3-25
PCIe cards, identifying installed 3-32
PCIe riser, replacing 3-24
physical specifications A-1
population rules for DIMMs 3-15
power
connecting power cords
2-8, D-3
emergency shutdown 3-7
graceful shutdown 3-7
main power mode 3-6
powering off 3-6
power status LED location 3-2
power supply replacement 3-12
shutting down 3-6
specifications A-2
standby power mode 3-6
supported power cords B-2
power cords
jumper power cord (figure)
B-7
supported power cords (figure) B-3
power cords supported B-2
powering off 3-6
power plugs B-3
power supplies, replacing 3-12
Q
Quiet Boot, disabling 3-32, C-2
R
rack, removing server from 3-7
rack installation 2-4
rack requirements 2-4
RAID
determining your controller model
C-1
disabling Quiet Boot C-2
enabling ICH10R controller C-3
LSI documentation references C-4
LSI utilities, launching C-4
rear panel, features 1-2
rear panel LEDs 3-3
rebooting with default CMOS 2-22
recovering corrupt BIOS 2-19
related documentation i-vii
removing server from rack 3-7
required equipment
installation
2-4
maintenance 3-6
S
shutting down 3-6
site planning guidelines 2-3
slide rail installation 2-4
specifications
environmental
A-2
physical A-1
power A-2
standby power mode 3-6
static network settings
using script
2-11
supported adapter card combinations D-10
T
top cover, removing 3-8
TPM, replacing 3-22