Troubleshooting guide

Send document comments to [e-mail]
32
Cisco UCS B22 Blade Server Installation and Service Note
OL-27513 -01
Server Troubleshooting
Step 4 On the Advanced tab, select Trusted Computing and press Enter.
Step 5 Set the TPM Support optionto Enable.
Step 6 Press F10 to save and exit. Allow the server to finish booting.
Server Troubleshooting
For general server troubleshooting information, refer to the "Troubleshooting Server Hardware" chapter
of the Cisco UCS Troubleshooting Guide.
Server Configuration
UCS servers are intended to be configured and managed using UCS Manager. Refer to the UCS Manager
Configuration Guide appropriate for your UCS Manager version
Server Specifications
Related Documentation
The documentation set for the Cisco Unified Computing System environment is described in full at:
http://www.cisco.com/go/unifiedcomputing/b-series-doc
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional
information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and
revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Table 8 Physical Specifications for the Cisco UCS B22 Blade Server
Specification Value
Height 1.95 inches (50 mm)
Width 8.00 inches (203 mm)
Depth 24.4 inches (620 mm)
Weight 13.5 lbs (6.1 kg)
1
1. The system weight listed here is an estimate for a fully configured system and will vary depending on peripheral devices
installed.