Specifications

ManualsBrandsCisco ManualsComputer equipmentUBR924 - uBR 924 Router

DOCSIS 1.1 for Cisco uBR905 and Cisco uBR925 Cable Access Routers and Cisco CVA122 Cable Voice Adapters

Command Reference

Cisco IOS Release 12.2(15)CZ

00:14:29: 869.564 CMAC_LOG_FOUND_US_CHANNEL 1

00:14:31: 871.484 CMAC_LOG_UCD_MSG_RCVD 1

00:14:31: 871.692 CMAC_LOG_MAP_MSG_RCVD

00:14:31: 871.694 CMAC_LOG_INITIAL_RANGING_MINISLOTS 40

00:14:31: 871.696 CMAC_LOG_STATE_CHANGE ranging_1_state

00:14:31: 871.700 CMAC_LOG_RANGING_OFFSET_SET_TO 9610

00:14:31: 871.704 CMAC_LOG_POWER_LEVEL_IS 32.0 dBmV (commanded)

00:14:31: 871.708 CMAC_LOG_STARTING_RANGING

00:14:31: 871.710 CMAC_LOG_RANGING_BACKOFF_SET 0

00:14:31: 871.714 CMAC_LOG_RNG_REQ_QUEUED 0

00:14:32: 872.208 CMAC_LOG_RNG_REQ_TRANSMITTED

00:14:32: 872.216 CMAC_LOG_RNG_RSP_MSG_RCVD

00:14:32: 872.218 CMAC_LOG_RNG_RSP_SID_ASSIGNED 16

00:14:32: 872.222 CMAC_LOG_ADJUST_RANGING_OFFSET 2853

00:14:32: 872.224 CMAC_LOG_RANGING_OFFSET_SET_TO 12463

00:14:32: 872.228 CMAC_LOG_ADJUST_TX_POWER 8

00:14:32: 872.230 CMAC_LOG_POWER_LEVEL_IS 34.0 dBmV (commanded)

00:14:32: 872.234 CMAC_LOG_STATE_CHANGE ranging_2_state

00:14:32: 872.238 CMAC_LOG_RNG_REQ_QUEUED 16

00:14:32: 872.848 CMAC_LOG_RNG_REQ_TRANSMITTED

00:14:32: 872.852 CMAC_LOG_RNG_RSP_MSG_RCVD

00:14:32: 872.856 CMAC_LOG_RANGING_SUCCESS

00:14:32: 872.874 CMAC_LOG_STATE_CHANGE dhcp_state

00:14:33: 873.386 CMAC_LOG_DHCP_ASSIGNED_IP_ADDRESS 188.188.1.62

00:14:33: 873.388 CMAC_LOG_DHCP_TFTP_SERVER_ADDRESS 4.0.0.32

00:14:33: 873.392 CMAC_LOG_DHCP_TOD_SERVER_ADDRESS 4.0.0.32

00:14:33: 873.396 CMAC_LOG_DHCP_SET_GATEWAY_ADDRESS

00:14:33: 873.398 CMAC_LOG_DHCP_TZ_OFFSET 60

00:14:33: 873.402 CMAC_LOG_DHCP_CONFIG_FILE_NAME platinum.cm

00:14:33: 873.406 CMAC_LOG_DHCP_ERROR_ACQUIRING_SEC_SVR_ADDR

00:14:33: 873.410 CMAC_LOG_DHCP_COMPLETE

00:14:33: 873.536 CMAC_LOG_STATE_CHANGE establish_tod_state

00:14:33: 873.546 CMAC_LOG_TOD_REQUEST_SENT

00:14:33: 873.572 CMAC_LOG_TOD_REPLY_RECEIVED 3140961992

00:14:33: 873.578 CMAC_LOG_TOD_COMPLETE

00:14:33: 873.582 CMAC_LOG_STATE_CHANGE

security_association_state

00:14:33: 873.584 CMAC_LOG_SECURITY_BYPASSED

00:14:33: 873.588 CMAC_LOG_STATE_CHANGE configuration_file_state

00:14:33: 873.592 CMAC_LOG_LOADING_CONFIG_FILE platinum.cm

00:14:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface cable-modem0, changed state to

00:14:34: 874.728 CMAC_LOG_CONFIG_FILE_PROCESS_COMPLETE

00:14:34: 874.730 CMAC_LOG_STATE_CHANGE registration_state

00:14:34: 874.734 CMAC_LOG_REG_REQ_MSG_QUEUED

00:14:34: 874.744 CMAC_LOG_REG_REQ_TRANSMITTED

00:14:34: 874.754 CMAC_LOG_REG_RSP_MSG_RCVD

00:14:34: 874.756 CMAC_LOG_COS_ASSIGNED_SID 1/16

00:14:34: 874.760 CMAC_LOG_RNG_REQ_QUEUED 16

00:14:34: 874.768 CMAC_LOG_REGISTRATION_OK

:14:34: 874.770 CMAC_LOG_REG_RSP_ACK_MSG_QUEUED 0

00:14:34: 874.774 CMAC_LOG_STATE_CHANGE establish_privacy_state

00:14:34: 874.778 CMAC_LOG_PRIVACY_NOT_CONFIGURED

00:14:34: 874.780 CMAC_LOG_STATE_CHANGE maintenance_state

00:14:34: 874.784 CMAC_LOG_REG_RSP_ACK_MESSAGE_EVENT

00:14:34: 874.788 CMAC_LOG_REG_RSP_ACK_MSG_SENT

The following example gives the typical error messages that appear in the MAC log when the DHCP

server cannot not be reached:

Router# show controllers cable-modem 0 mac log

00:14:32: 872.874 CMAC_LOG_STATE_CHANGE dhcp_state