Specifications

DOCSIS 1.1 for Cisco uBR905 and Cisco uBR925 Cable Access Routers and Cisco CVA122 Cable Voice Adapters
Command Reference
50
Cisco IOS Release 12.2(15)CZ
Tip These values are the same that are set using the docsBpi2CodeMfgCodeAccessStart,
docsBpi2CodeMfgCvcAccessStart, and docsBpi2CodeMfgOrgName attributes in the BPI+ MIB
(DOCS-BPI2-MIB).
Examples The following example shows the default configuration for the docsis cvc mfg commands:
Router(config)# docsis cvc mfg organization "Cisco Systems"
Router(config)# docsis cvc mfg codeAccessStart 011219000000Z
Router(config)# docsis cvc mfg cvcAccessStart 011219000000Z
Router(config)#
Note You must set the organization name using the docsis cvc mfg organization command before you can set
either access start time.
Related Commands Command Description
docsis cvc mso Configures the access start times and organization name for the
optional Multi-Service Operator (MSO) cosigned code verification
certificate (CVC).
docsis cvc test Tests the root CA public key and CM private key that are installed
on the router.