Specifications

DOCSIS 1.1 for Cisco uBR905 and Cisco uBR925 Cable Access Routers and Cisco CVA122 Cable Voice Adapters

How to Configure DOCSIS 1.1 Support

Cisco IOS Release 12.2(15)CZ

3 NA

Packet Classifiers

Class id SFID Pri valid Match SIDT

1 91 0 D6 1782 80D2754C

2 93 0 D6 691 80D275C0

Packet Classifier Details

Classifier id = 1 SFID = 91

IP source: 10.188.1.88

IP dest: 10.188.1.66

UDP/TCP source range: 18416 to 18416

UDP/TCP dest range: 16740 to 16740

IP Protocol: 17

PHS: Inactive

Classifier id = 2 SFID = 93

IP source: 10.188.1.88

IP dest: 10.188.1.66

UDP/TCP source range: 16796 to 16796

UDP/TCP dest range: 19138 to 19138

IP Protocol: 17

PHS: Inactive

Downstream Payload Header Suppression

Router#

Verifying the SNMPv3 Diffie-Hellman Configuration

Use the following procedure to verify that the SNMPv3 Diffie-Hellman Kickstart configuration has been

accomplished and that SNMPv3 operations are enabled on the router.

Step 1 Display the current SNMP users using the show snmp user command. The dhKickstart user should be

shown as a permanent and active user.

Router# show snmp user

User name: docsisUser