Specifications

DOCSIS 1.1 for Cisco uBR905 and Cisco uBR925 Cable Access Routers and Cisco CVA122 Cable Voice Adapters
How to Configure DOCSIS 1.1 Support
31
Cisco IOS Release 12.2(15)CZ
SUMMARY STEPS
1. enable
2. configure terminal
3. dial-peer voice id-number voip
4. destination-pattern digits
5. session target ras
6. codec {g711alaw | g711ulaw | g723ar53 | g723ar63 | g726r16 | g726r24 | g726r32 | g729br8 |
g729r8}
7. dtmf-relay {cisco-rtp | h245-signal | h245-alphanumeric}
8. req-qos {best-effort | controlled-load | guaranteed-delay}
9. ip precedence number
10. ip qos dscp class-selector media
11. exit
12. gateway
13. exit
DETAILED STEPS
Command Description
Step 1
enable
Example:
Router> enable
Router#
Enables privileged EXEC mode. Enter your password if
prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Router(config)#
Enters global configuration mode.
Step 3
dial-peer voice id-number voip
Example:
Router(config)# dial-peer voice 13 voip
Router(config-dial-peer)#
Specifies a unique ID number for this outgoing dial peer and
enter dial-peer configuration mode.
Step 4
destination-pattern digits
Example:
Router(config-dial-peer)# destination-pattern
5551212
Router(config-dial-peer)#
Specifies the telephone numbers associated with this dial
peer.