Specifications

DOCSIS 1.1 for Cisco uBR905 and Cisco uBR925 Cable Access Routers and Cisco CVA122 Cable Voice Adapters
How to Configure DOCSIS 1.1 Support
25
Cisco IOS Release 12.2(15)CZ
Use the following procedure to configure the Cisco uBR905, Cisco uBR925, or Cisco CVA122 with the
required certificates.
Step 1 Add the manufacturer’s CVC to a DOCSIS configuration file in the “Manufacturer Code Verification
Certificate” field (TLV 32). If using the graphical interface of the DOCSIS Configurator tool, enter the
CVC data directly into the Configurator tool by clicking the Miscellaneous tab and entering the data in
the “Manufacturer CVC” field. See Figure 4.
Figure 4 shows an example of this using version 3.7 of the Cisco DOCSIS Configurator tool. Figure 5
shows an example of this using version 4.0 of the Cisco Broadband Configurator tool.
Figure 4 Entering the M-CVC into Cisco DOCSIS Configurator Release 3.7