Specifications

DOCSIS 1.1 for Cisco uBR905 and Cisco uBR925 Cable Access Routers and Cisco CVA122 Cable Voice Adapters
Command Reference
107
Cisco IOS Release 12.2(15)CZ
Usage Guidelines This command enables the sending of SNMP traps when DOCSIS-related events occur. Multiple traps
can be enabled at the same time.
Note The traps are described in the DOCS-CABLE-DEVICE-TRAP-MIB MIB, which is is an extension of
the CABLE DEVICE MIB that is defined in RFC 2669.
Examples The following example shows the BPI+ and secure software download traps being enabled:
Router# config terminal
Router(config)# snmp-server enable traps docsis-cm bpi bpkm swupcvc swupfail swupinit
swupsucc
Router(config)#
Related Commands Command Description
show snmp Checks the status of SNMP communications.
snmp-server manager Starts the SNMP manager process.