Specifications

DOCSIS 1.1 for Cisco uBR905 and Cisco uBR925 Cable Access Routers and Cisco CVA122 Cable Voice Adapters

Command Reference

106

Cisco IOS Release 12.2(15)CZ

snmp-server enable traps docsis-cm

To enable one or more Simple Network Management Protocol (SNMP) traps for DOCSIS 1.1 events, use

the snmp-server enable traps docsis-cm command in global configuration mode. To disable the SNMP

traps, use the no form of this command.

Cisco uBR905 and Cisco uBR925 Cable Access Routers, and Cisco CVA122 Cable Voice Adapter

Syntax Description

Defaults No traps are enabled. If no options are specified, all DOCSIS-related traps are enabled.

Command Modes Global configuration

Command History

bpi (Optional) Baseline Privacy Interface (BPI) initialization failure traps.

bpkm (Optional) Baseline Privacy Key Management (BPKM) initialization failure

traps.

dccack (Optional) Dynamic channel change acknowledgement failure traps.

dccreq (Optional) Dynamic channel change request failure traps.

dccrsp (Optional) Dynamic channel change response failure traps.

dhcp (Optional) DHCP failure traps.

dsack (Optional) Dynamic service acknowledgement failure traps.

dsreq (Optional) Dynamic service request failure traps.

dsrsp (Optional) Dynamic service response failure traps.

dynsa (Optional) Dynamic SA failure traps.

swupcvc (Optional) Secure software upgrade code verification certificate (CVC)

failure traps.

swupfail (Optional) Secure software upgrade failure traps.

swupinit (Optional) Enables secure software upgrade initialization failure traps.

swupsucc (Optional) Secure software upgrade success traps.

tlv (Optional) Unknown Type/Length/Value (TLV) traps.

Release Modification

12.2(15)CZ This command was introduced on the Cisco uBR905 and Cisco uBR925

cable access routers, and the Cisco CVA122 Cable Voice Adapter.