Installation guide

Index
IN-3
Cisco uBR7100 Series Universal Broadband Router Software Configuration Guide
OL-2238-03
cable upstream admission-control command 3-14
cable upstream channel-width command 3-12
cable upstream data-backoff command 3-22
cable upstream differential-encoding command 3-16
cable upstream fec command 3-14
cable upstream frequency-adjust averaging
command
3-18
cable upstream frequency command 3-10
cable upstream minislot-size command 3-15
cable upstream power-adjust command 3-19
cable upstream power-level command 3-13
cable upstream range command 3-22
cable upstream rate-limit token-bucket command 3-17
cable upstream scrambler command 3-16
cable upstream time-adjust command 3-20
caution
symbol
ix
cautions
Cisco uBR7100 series
upstream scrambler
3-16
changes, reviewing configuration 2-25
Cisco CMTS 1-1
Cisco IOS
12.2 BC release train and images
1-1, 1-2
determining your Cisco IOS software release 1-4
location 1-4
operational overview 1-4
upgrading to a new software release 1-5
Cisco uBR7100 series
downstream rate limiting
3-8
upstream scrambler
caution
3-16
clear cable flap-list command 5-41
clear cable modem counters command 5-9
clear cable modem reset command 5-8
commands
config terminal
2-15
configure 2-15
copy running-config startup-config 2-7, 2-24
enable 2-15
enable password 2-3
enable secret 2-3
setup 2-8
show interfaces 2-21
show interfaces cable 2-19
show running-config 2-25
show startup-config 2-25
configuration
files
saving
2-15, 2-24
interface 2-13
reviewing modifications 2-25
configuration bit meanings A-1
configuration modes, basic 2-15
configuration procedures
AutoInstall
2-7
Ethernet interface configuration 2-13
setup command facility 2-8
synchronous serial interface configuration 2-13
configuration register A-1
configure command 2-15
configuring
global parameters
description
2-8
procedure 2-9
interface parameters
examples of
2-13
sample configuration 2-14 to 2-15
interfaces 2-13
the router
using AutoInstall
2-7
using configuration mode 2-15
using the setup command facility 2-8
copy command
running-config startup-config
2-7
running-config startup-config command 2-24